AQUAS-10 Water Conditioner

The AQUAS-10 is a fully integrated water conditioning system in compliance with IEC 62781 that controls factors that affect ultrasound measurements including dissolved gases, deionized compounds, suspended particulates, and biological contaminants.

Key Features and Benefits
  • Simple installation for use with ultrasound measurement system
  • Deionizes water to minimize electrical noise received by hydrophone
  • Removes suspended particles that scatter ultrasound
  • Removes biological contaminants that pose as a health risk
  • Remote power switch easily turns the water pump ON and OFF
  • Simple particle and DI filter replacement
  • Water sensor safeguards against any leaks
The AQUAS-10 is a complete water conditioner designed for use with ultrasound measurements in compliance with Technical Report IEC 62781. Because the quality of acoustic measurement can be significantly affected by various impurities - such as dissolved gases, deionized compounds, suspended particulates, and biological contaminants - a water treatment system is critical. The AQUAS-10 controls each of these factors in a fully integrated simple-to-use system.
  • Degassing:  dissolved oxygen reduced down to 4 ppm (or mg/L) in 5 hours for a 100 liter tank
  • Flow rate: approx. 1.2 L per min
  • Filter cartridges: 1 micron particle filter, deionizing filter
  • UV Sterilizer: in‐line ultraviolet lamp
  • Power: 110‐120VAC, 50/60Hz, approx. 2 amps running 220‐240VAC, 50/60Hz, approx. 1 amps running
  • Cabinet dimensions: 55 cm (W) x 56 cm (H) x 52 cm (D), 21.5” (W) x 22” (H) x 20.5” (D)
  • System Dry Weight (approximate): 25 kilograms or 55 pounds

Related Resources

AQUAS-10 Data Sheet

AQUAS-10 Data Sheet

Get technical specs and information for the AQUAS-10 complete water conditioner.

Get Data Sheet

Have questions about Onda products?
Get help from Onda’s expert sales team
   Contact Us