PCS-1000 Pulsed Check Source

The PCS-1000 serves as a trustworthy reference pulsed check source, representing diagnostic imaging conditions, to regularly check the health of an acoustic measurement system.

Key Features and Benefits
  • PCS-1000 calibration traceable to a National Standards Laboratory
  • Complies with regulatory standards
  • Portable plug-and-play unit with visible blue transducer
  • Selectable output power: 18 mW and 80 mW
  • Attenuator provides linear mode output
  • Simple synchronization with measurement system
Designed to meet the need for a stable reference source in laboratories, the PCS-1000 serves as a trustworthy reference to regularly check the health of an acoustic measurement system. While representing your diagnostic imaging source, the PCS consists of a certified electronics controller and transducer that produces a known acoustic output. The PCS is calibrated in full compliance with regulatory standards AIUM-NEMA UD-2, UD-3, IEC 62127 and associated IEC standards.
Controller:
  • Output pressures:  Pcmax:  4 – 6 MPa, Prmax:  1.5 – 2.5 MPa
  • Pulse Repetition Frequency: 2 & 10 kHz
  • Total Acoustic Power (nominal): 16 mW & 80 mW
  • Output Power Stability: ± 3% from certified value
  • AC supply: 110/220 V, 60/50 Hz
  • Pulses ON / OFF externally controlled by TTL input
  • Synch Signal Output: TTL
  • Linearity (attenuated mode)* : σm < 0.5
  • Dimensions: 254 (W) x 146 (D) x 71 (H) mm
Motion:
  • Pulse center frequency: 3.5MHz, broadband
  • Dimensions: 32 mm diameter, 144 mm long
  • Cable length: 2 m

Related Resources

PCS-1000 Data Sheet

PCS-1000 Data Sheet

Get technical specs and information for the PCS-1000 in this detailed data sheet.

Get Data Sheet

Have questions about Onda products?
Get help from Onda’s expert sales team
   Contact Us