THAS05 Transducer Holder Assembly Set

The THAS05 is a set of assemblies used to hold the transducer under test. The THAS05 consists of:
  • Cross-span slide assembly (mounts on top edge of the tank)
  • 90° clamp block for 1/2" rod(2 ea.)
  • stainless steel rod, 1/2" x 4"
  • stainless steel rod, 1/2" x 8"
  • stainless steel rod, 1/2" x 16"
  • general purpose clamp assembly

Below are photos of possible setup holding a small transducer:

  


592 Weddell Drive, Suite 7, Sunnyvale, CA 94089, Tel: (408) 745-0383, Fax: (408) 745-0956
Copyright © 1995-2006 Onda Corporation. All Rights Reserved.